And, they are not taking into consideration the underground strata. Do we have an extensive layer of clay? Or, do we drop into a strata with large aggregate where the oil could flow freely? I've been in excavations 50 feet deep within a few hundred yards of a river and not had a single drop of water. OTOH, my last project was in South Dakota. There, we were almost a quarter mile from the Missouri River and 38 feet deep. The boulders at that elevation allowed for an underground river. Took me only a couple weeks to convince the contractor what needed done to get the hole dry enough to place the required concrete. Meanwhile he was pumping millions of gallons of water/day, simply recirculating it back through his excavation.
Does anyone also understand this oil will not flow by gravity. There will be pumps and air release valves along the way. The high viscosity of the liquid will require pressure to move it along. So... you don't get a drip, drip, drip. A rupture can spray oil a fair distance or have a complete blowout.
I spent a lot of my career working below the surface and designing projects that would be constructed fairly deep. When someone makes a statement that a large oil spill won't negatively affect more than a small area, they are probably unfamiliar with the geotechnical aspect of the area. If they are familiar, I'd like to see some soil analysis reports from every few miles along the proposed pipeline route.