New Posts
  • Hi there guest! Welcome to PoliticalJack.com. Register for free to join our community?

Ta-da! did it

Days

Commentator
Finally finished my design for a 21st century drum hoist. (took me 20 years) But I'll need about a dozen patents pending and a hundred suppliers. I can wait for my kid to become an engineer and draw the whole thing up for the patents. I figure I could send work to a lot of American companies, have them build everything, ship it to me, and I'll assemble the hoists in my garage. Money is no problem, I'll just pre-sell my hoists to the tallest skyscrapers on the planet; I can climb all of them except the top two (which are not built yet). Sound plausible? Not to me, I don't own a garage.


[video=youtube;vQ1KF1nP4Ao]https://www.youtube.com/watch?v=vQ1KF1nP4Ao[/video]
 
Some times it gives you pause, dealing with the most powerful people on the planet. But the funny truth is, they are easy... it's the nuts on the street that were hard. I'm done rigging, I'm just building the hoist that can wash windows on the tallest skyscrapers in the world (it can do #2 also, but who was the nut that wanted a mile high building? - that one is out of reach)
 
Some times it gives you pause, dealing with the most powerful people on the planet. But the funny truth is, they are easy... it's the nuts on the street that were hard. I'm done rigging, I'm just building the hoist that can wash windows on the tallest skyscrapers in the world (it can do #2 also, but who was the nut that wanted a mile high building? - that one is out of reach)

I'm not sure you want to tell your investors that your invention can "do #2"!
 
Finally finished my design for a 21st century drum hoist. (took me 20 years) But I'll need about a dozen patents pending and a hundred suppliers. I can wait for my kid to become an engineer and draw the whole thing up for the patents. I figure I could send work to a lot of American companies, have them build everything, ship it to me, and I'll assemble the hoists in my garage. Money is no problem, I'll just pre-sell my hoists to the tallest skyscrapers on the planet; I can climb all of them except the top two (which are not built yet). Sound plausible? Not to me, I don't own a garage.


[video=youtube;vQ1KF1nP4Ao]https://www.youtube.com/watch?v=vQ1KF1nP4Ao[/video]

you dont need an engineer to draw up the hoist. any mechanical CAD operator could do it from your sketches. sound plausible? sounds like a load of codswallop.
 
My boy is in autocad 1, he's a freshman, first semester. Mostly I just wanted to show him my hoist as a challenge for him to draw it up in autocad some day. In the process of returning to the design I managed to figure out all the complicated stuff that had eluded me in years past. I'm not sure I really want to build the hoist as much as I'd like to draw it up and get the patents... at that point, I might sell out to my brother and let him build it. Nobody in the industry thinks this can be done. But no one has ever dreamed of doing it this way. I originally was trying to design a drum hoist that could do that roof to street drop at the Willis tower (Sears Tower) - 1450 feet - there were so many difficulties to overcome in design, but once I figured out how to do it all, I figure the hoist has an upper reach of somewhere like twice the height of the Willis tower.
 
You don't need Autocad. You need Inventor or Solidworks. PM me.. I've got an older version that will work fine for you and the tutorial is literally easy enough for a 12yo to get through (mine did as part of school project)
 
My boy is in autocad 1, he's a freshman, first semester. Mostly I just wanted to show him my hoist as a challenge for him to draw it up in autocad some day. In the process of returning to the design I managed to figure out all the complicated stuff that had eluded me in years past. I'm not sure I really want to build the hoist as much as I'd like to draw it up and get the patents... at that point, I might sell out to my brother and let him build it. Nobody in the industry thinks this can be done. But no one has ever dreamed of doing it this way. I originally was trying to design a drum hoist that could do that roof to street drop at the Willis tower (Sears Tower) - 1450 feet - there were so many difficulties to overcome in design, but once I figured out how to do it all, I figure the hoist has an upper reach of somewhere like twice the height of the Willis tower.

does your jurisdiction requires an engineers seal on the design before manufacture? i imagine if you want to go national, it will.
 
My father employed a master civil engineer, design draftsmen (BS in civil engineering) and mechanical engineers that actually built the designs. He was on five continents, but I don't know that my brothers maintained that kind of presence in the industry. People will still recognize my last name all over the planet, so if I were to build the hoist I would name it as such. If I wanted to run it myself, I would just have my brother build the frames and go to folks specializing in gears, and others specializing in dc generator brakes and others for all the sheaves, overspeeds, cams, drum castings... I would just assemble the hoists; the people building the parts have the engineers.

I'm thinking the monster might need to be titanium or it would be too heavy... if I could keep the cost down to ten times my most expensive competitor, that would be a success. You have to understand, this would be the first super high rise hoist; I did that by returning to a drum; something that has been obsolete for quite some time; the mainstream thought being that drum hoists are dinosaurs; but there was never anything built on this scale, or this way.
 
your box is full!

It would nice to learn about that design software.

I really need to get this design out of my head onto paper... my head is the most fragile place to store it!

If I could get some drawings together, I could send for the patents... god usually gives ideas to more than one mind at a time, so it would not surprise me if someone else is receiving the same thoughts, then it is a race to the patent office. I doubt that could be happening with this particular design, but you never know, stranger things have happened.

damian.crudele@gmail.com
 
My father employed a master civil engineer, design draftsmen (BS in civil engineering) and mechanical engineers that actually built the designs. He was on five continents, but I don't know that my brothers maintained that kind of presence in the industry. People will still recognize my last name all over the planet, so if I were to build the hoist I would name it as such. If I wanted to run it myself, I would just have my brother build the frames and go to folks specializing in gears, and others specializing in dc generator brakes and others for all the sheaves, overspeeds, cams, drum castings... I would just assemble the hoists; the people building the parts have the engineers.

I'm thinking the monster might need to be titanium or it would be too heavy... if I could keep the cost down to ten times my most expensive competitor, that would be a success. You have to understand, this would be the first super high rise hoist; I did that by returning to a drum; something that has been obsolete for quite some time; the mainstream thought being that drum hoists are dinosaurs; but there was never anything built on this scale, or this way.

the folks that make the parts have to see the general assembly drawings to be able to analyze all the stresses in the parts they are responsible for.
 
that's why I have to get the patents first. My kid can probably help me do those drawings. Next step would be to go to my brother in Michigan and pay his design draftsmen (the guys who put out the bids) to draw up those general assembly plans and then onto his mechanical engineers to detail the material, thickness, and methods of construction... which would constitute my work orders to my suppliers... their people would finalize the product... then I have to assemble it all. I have a stepson in marketing that always wanted to run his own production, from manufacture to end sale; he could build the corporation, my whole role would be to get the patents pending and to achieve a prototype; then sell it. I've got to bring in the orders. My stepson would use that to get the financing together for production. The financial hurdle is building the prototype... I have to be able to generate enthusiasm with design drawings and then use that to finance the prototype. It is nearly impossible to start up a business in this industry; insurance costs are astronomical. That's why I would only assemble the hoists; let my bro do the davits and pedestals, staging, and installation. It would feed some huge contracts to him, so you would think the jerk would have returned my call. As yet, no one believes I have a working design, or that it is possible to climb half a mile with a drum hoist; the weight of the wire rope alone is ridiculous.
 
that's why I have to get the patents first. My kid can probably help me do those drawings. Next step would be to go to my brother in Michigan and pay his design draftsmen (the guys who put out the bids) to draw up those general assembly plans and then onto his mechanical engineers to detail the material, thickness, and methods of construction... which would constitute my work orders to my suppliers... their people would finalize the product... then I have to assemble it all. I have a stepson in marketing that always wanted to run his own production, from manufacture to end sale; he could build the corporation, my whole role would be to get the patents pending and to achieve a prototype; then sell it. I've got to bring in the orders. My stepson would use that to get the financing together for production. The financial hurdle is building the prototype... I have to be able to generate enthusiasm with design drawings and then use that to finance the prototype. It is nearly impossible to start up a business in this industry; insurance costs are astronomical. That's why I would only assemble the hoists; let my bro do the davits and pedestals, staging, and installation. It would feed some huge contracts to him, so you would think the jerk would have returned my call. As yet, no one believes I have a working design, or that it is possible to climb half a mile with a drum hoist; the weight of the wire rope alone is ridiculous.

just thinking about it all is exciting, PROVIDED I was young again!! its gonna take gobs of energy and even then, you may never get the interest necessary to get the money for launch.. ive been thru it all before but with a device that doesnt have such radical safety and insurance requirements and at the end of it all the customers were just as happy to continue doing it the inefficient way they always had. industry is very conservative.its fun to provide your family with a great project but if it was me i'd just license the whole damn thing to someone with real deep pockets and take a royalty
 
Back
Top